پیشرفت‌های سنسورهای الکتروشیمیایی مبتنی بر نانو‌لوله‌های کربنی در شناسایی یون‌های فلزی خطرناک در پساب‌های پالایشگاهی

اجع

1. Xu, Z., Zhang, Y., & Li, Y. (2020). Electrochemical sensors based on carbon nanotubes

for trace detection of toxic metal ions: A review. Sensors and Actuators B: Chemical, 318,

128332.

2. Li, L., Li, H., & Zhang, X. (2021). Development of high-performance electrochemical

sensors for heavy metal detection in environmental monitoring: A review. Environmental

Science & Technology, 55(3), 1125-1137.

3. Oladimeji, T. E., et al. (2024). Review on the impact of heavy metals from industrial

wastewater effluent and removal technologies. Heliyon, 10, e040370.

4. Chen, S., Li, Z., & Wang, X. (2020). Functionalized carbon nanotube-based

electrochemical sensors for environmental monitoring. Electrochimica Acta, 345, 136264.

5. Kim, H., & Kim, D. (2018). Electrochemical sensing of heavy metal ions using carbon

nanotubes and their composites: A review. Electroanalysis, 30(9), 2090-2102.

6. Zhang, X., Zhang, W., & Li, X. (2021). Development of intelligent electrochemical

sensors based on carbon nanotubes for environmental monitoring. Sensors, 21(9), 3117.

7. Li, X., Zhang, Y., & Li, H. (2020). Cost-effective and scalable fabrication of carbon

nanotube-based sensors for heavy metal detection in industrial wastewater. Journal of

Environmental Chemical Engineering, 8(5), 104199.

8. Sharma, S., Pandey, R., & Kumar, M. (2021). Carbon nanotube-based sensors for

monitoring water and wastewater quality: Recent advancements and future perspectives.

Environmental Science and Pollution Research, 28(15), 19245-19264.

9. Wang, H., & Chen, W. (2021). Electrochemical detection of environmental pollutants:

Carbon nanotube-based sensors. Journal of Electroanalytical Chemistry, 877, 114944.

10. Yuan, X., Li, X., & Chen, Z. (2018). Amperometric electrochemical sensor based on

carbon nanotubes for the detection of cadmium ions in environmental samples. Analytical

Methods, 10(6), 738-746.

11. Li, Y., & Zhang, Q. (2021). Recent advances in carbon nanotube-based electrochemical

sensors for heavy metal detection in industrial wastewater. Sensors & Actuators B:

Chemical, 331, 129441.

12. Kumar, A., & Kumar, P. (2019). Electrochemical sensors based on carbon nanotubes for

heavy metal ion detection in wastewater. Journal of Environmental Management, 246, 718-

726.

13. Sun, M., & Zhao, Q. (2020). Advances in electrochemical sensors for the detection of

toxic metals in environmental monitoring. Environmental Pollution, 265, 114900.

https://oil.bcnf.ir 17 صفحه

14. Li, Z., & Wang, L. (2021). Carbon nanotube-based electrochemical sensors for

environmental applications. Analytical Chemistry, 93(8), 4581-4591.

15. Hu, X., & Zhang, W. (2021). Review on the recent advancements of carbon nanotubebased electrochemical sensors for environmental monitoring. Environmental Science and

Pollution Research, 28(9), 10453-10465.

16. Yang, F., & Wang, L. (2020). Electrocatalytic properties of carbon nanotubes for

environmental pollution detection and their applications in sensors. Journal of Hazardous

Materials, 392, 122246.

17. Yu, J., & Yang, X. (2019). Recent developments of carbon nanotube-based

electrochemical sensors for environmental pollution monitoring. Environmental Chemistry

Letters, 17(4), 1459-1468.

18. Zhang, Y., & Xu, Z. (2020). Electrochemical sensors based on functionalized carbon

nanotubes for selective detection of heavy metals in environmental samples. Sensors and

Actuators B: Chemical, 320, 128184.

19. Liao, L., & Zhao, L. (2021). Carbon nanotube-based electrochemical sensors for the

detection of heavy metals in wastewater: A review. Journal of Environmental Science and

Technology, 40(2), 412-421.

20. Zhang, W., & Wang, X. (2020). The applications of carbon nanotubes in environmental

monitoring: A review. Environmental Pollution, 262, 114280.

21. Wang, S., & Sun, Y. (2019). Electrochemical sensors based on carbon nanotubes for

monitoring water quality. Environmental Monitoring and Assessment, 191(10), 627.

22. Wang, H., & Li, X. (2020). Recent advances in the development of electrochemical

sensors for environmental monitoring based on carbon nanotubes. Environmental Science &

Technology, 54(12), 7396-7405.

23. Liu, J., & Wang, W. (2020). Nanomaterials-based electrochemical sensors for

environmental monitoring. Journal of Electrochemical Science and Technology, 11(2), 156-

167.

24. Wang, C., & Li, H. (2019). Carbon nanotube-based sensors for heavy metals: Advances

in detection methods and applications. Journal of Environmental Monitoring, 21(7), 1232-

1243.

25. Liu, S., & Wang, Y. (2021). Electrochemical sensors for environmental monitoring based

on carbon nanotubes: Current progress and future perspectives. Environmental Pollution,

276, 116671.

26. Zhang, Z., & Li, L. (2019). Carbon nanotube-based electrochemical sensors for detection

of environmental pollutants in complex media. Environmental Science and Technology

Letters, 6(10), 579-584.

27. Li, X., & Zhang, Z. (2020). Electrochemical sensors for environmental monitoring based

on carbon nanotubes: Recent advances and future directions. Science of the Total

Environment, 724, 138290.

https://oil.bcnf.ir 18 صفحه

28. Zhan, L., & Li, J. (2021). Carbon nanotube-based electrochemical sensors for selective

and sensitive detection of heavy metals in environmental samples. Sensors and Actuators B:

Chemical, 334, 129731.

29. Yu, L., & Liu, Y. (2020). Electrochemical sensors for heavy metals detection based on

carbon nanotubes: Recent developments and future challenges. Sensors, 20(12), 3446.

30. Zhang, W., & Liu, Y. (2019). The development of carbon nanotube-based

electrochemical sensors for environmental monitoring. Environmental Research Letters,

14(5), 053003.

31. Bakker, E., Bührer, M., & Pretsch, E. (1997). Potentiometric sensors for trace-level

analysis. TrAC Trends in Analytical Chemistry, 16(4), 215–220.

32. Wang, J., Liu, G., & Jan, M. R. (2009). Electrochemical biosensors based on carbon

nanotubes. Electrochemistry Communications, 11(4), 889–894.

33. Xu, X., et al. (2020). Carbon Nanotube-Based Amperometric Sensor for Detection of

Cd²⁺ and Pb²⁺ in Industrial Wastewater. Journal of Electroanalytical Chemistry, 858, 113823.

34. Wang, Y., et al. (2021). Potentiometric Detection of Hg²⁺ Using a Carbon NanotubeModified Electrode. Sensors and Actuators B: Chemical, 330, 129311.

35. Wang, L., Wang, J., & Zhang, Y. (2021). Carbon nanotube-based electrochemical

sensors for environmental monitoring. Journal of Environmental Monitoring, 23(7), 1345-

1361.

36. Chowdhury, I. R., et al. (2022). Removal of lead ions (Pb²⁺) from water and wastewater:

A review on the low-cost adsorbents. Applied Water Science, 12, 185.

37. Saputra, H. A. (2023). Electrochemical sensors: basic principles, engineering, and state

of the art. Monatshefte für Chemie – Chemical Monthly.

38. Schreiber, M. E., & Cozzarelli, I. M. (2020). Arsenic release to the environment from

hydrocarbon production, storage, transportation, use and waste management. Journal of

Hazardous Materials, 423, 126105.

39. Baranwal, J., et al. (2022). Electrochemical sensors and their applications: A review.

Chemosensors, 10(9), 363.

40. Cho, G., et al. (2021). Electrical and electrochemical sensors based on carbon nanotubes

for the monitoring of chemicals in water—A review. Sensors, 22(18), 7218.

41. Duarte, R. R., et al. (2021). Development of electrochemical HRP-MWCNT-based

screen-printed biosensor for the determination of phenolic compounds in effluent from

washing coffee beans. Revista Virtual de Química, 13(1), 1–15.

42. Zhou, Y., et al. (2020). A voltammetric sensor based on AuNPs and carbon nanotubes

for simultaneous detection of lead and cadmium. Sensors and Actuators B: Chemical, 309,

127779.

43. Singh, A. K., et al. (2019). Potentiometric determination of Cu²⁺ using carbon nanotubebased ion-selective electrode in industrial wastewater. Sensors and Actuators B: Chemical,

296, 126647.

https://oil.bcnf.ir 19 صفحه

44. Alavi, S. M., et al. (2019). An impedance-based conductometric sensor using MWCNTchitosan nanocomposite for Cr³⁺ ion detection in wastewater. Electrochimica Acta, 297,

135080.

45. Chen, Y., Zhang, W., & Liu, Y. (2018). Highly sensitive voltammetric detection of Zn²⁺

ions based on Nafion–carbon nanotube nanocomposite modified electrode. Talanta, 178,

278–285.

46. Rodríguez, M. C., et al. (2020). Applications of carbon nanotubes-based electrochemical

sensing strategies for heavy metals and arsenic quantification. In Carbon-Based

Nanomaterials in Analytical Chemistry (pp. 189–210). Taylor & Francis.

47. Srivastava, N., & Mishra, G. (2022). Nanotechnology for environmental pollution

detection and remedies. In Miniaturized Analytical Devices (Chapter 13). Wiley.

48. Zhao, K., et al. (2021). Near real-time analysis of para-cresol in wastewater with a

laccase-carbon nanotube-based biosensor. Chemosphere, 276, 130179.

49. Chen, T. W., et al. (2019). A review of the advanced developments of electrochemical

sensors for the detection of toxic and bioactive molecules. Inorganic Chemistry Frontiers,

6(6), 1603–1628.

50. Basheer, A. O., & Al-Douri, Y. (2022). Industrial applications of nanotubes. In

Graphene, Nanotubes and Quantum Dots-Based Nanotechnology for Environmental

Applications (Chapter 2). Elsevier.

51. Mukherjee, A. (2024). Carbon nanotubes-based sensors for environmental applications.

In Carbon Nanotube-Based Sensors (pp. 133–155). Taylor & Francis.

52. Sharma, R., Kumar, V., & Singh, A. (2021). Integration of carbon nanotube-based

sensors with water purification systems. Environmental Nanotechnology, Monitoring &

Management, 15, 100424.

53. Das, R. (2018). Carbon nanotubes for clean water. Springer.

54. Zhou, Y., Li, X., & Zhang, H. (2024). Machine learning-integrated CNT sensors for

smart environmental monitoring. Sensors and Actuators B: Chemical, 408, 134120.

55. Musameh, M. M., Hickey, M., & Kyratzis, I. L. (2011). Carbon nanotube-based

extraction and electrochemical detection of heavy metals. Research on Chemical

Intermediates, 37(6), 675–689.

56. Bansod, B. K., et al. (2017). A review on various electrochemical techniques for heavy

metal ions detection with different sensing platforms. Biosensors and Bioelectronics, 94,

443–455.

57. Kempahanumakkagari, S., et al. (2017). Nanomaterial-based electrochemical sensors for

arsenic – A review. Biosensors and Bioelectronics, 95, 106–117.

58. Carbon Nanomaterials-Based Electrochemical Sensors for Heavy Metal Detection:

Critical Reviews in Analytical Chemistry, 54(7).

https://oil.bcnf.ir 20 صفحه

59. Ye, H., Zuo, G., & Li, R. (2022). Rapid electrochemical detection of heavy metal ions

Pb²⁺ and Cd²⁺ in petroleum wastewater. International Journal of Electrochemical Science,

17, 221136.

60. Shukla, P., et al. (2022). Metal-organic-frames (MOFs) based electrochemical sensors

for sensing heavy metal contaminated liquid effluents: A review. Nanoarchitectonics, 3(2),

46–63.

61. Ding, Q., et al. (2021). Electrochemical detection of heavy metal ions in water. Chemical

Communications, 57(59), 7215–7231.

62. Zhao, D., Siebold, D., Alvarez, N. T., Shanov, V. N., & Heineman, W. R. (2017). Carbon

Nanotube Thread Electrochemical Cell: Detection of Heavy Metals. Analytical Chemistry,

89(17), 8880–8885.