Design and simulation a closed loop AC chopper converter with RL load with the approach of reducing the output and input total harmonic distortion
کلمات کلیدی:
AC chopper, AC-to-AC converter, Total harmonic distortionچکیده
In this article a closed loop AC chopper is designed and simulated. The load side of the converter consists of a resistance and an inductance. The aim of this paper is to achieve both an output with low total harmonic distortion and an input with low total harmonic distortion as a result a high power factor both in the output side of the converter and in the input side of the converter will be seen; therefore the power losses during the power transmission process will be decreased but the power quality parameters in the converter will be improved. There are two main control methods for switching the power electronic switches in this converter; open loop control method and closed loop control method. In this article closed loop control method is considered.
دانلودها
مراجع
[1] Park, C. Y., Kwon, J. M., & Kwon, B. H. (2012). Automatic voltage regulator based on series voltage compensation with ac chopper. IET Power Electronics, 5(6), 719-725.
[2] ASHOKA KRISHNA BHAT, S. (1981). Digitally controlled multiple-pulse-width-modulated AC chopper for power control. International Journal of Electronics Theoretical and Experimental, 51(1), 45-56.
[3] Shinyama, T., Kawai, M., Torii, A., & Ueda, A. (2006). Characteristic of an AC chopper circuit with LC filters in the input and output side. Electrical Engineering in Japan, 155(2), 45-52.
[4] Mahendran, S., Gnanambal, I., & Maheswari, A. (2016). FPGA-based genetic algorithm implementation for AC chopper fed induction motor. international journal of electronics, 103(12), 2029-2041.
[5] Kim, J. H., & Kwon, B. H. (2000). Three-phase ideal phase shifter using AC choppers. IEE Proceedings-Electric Power Applications, 147(4), 329-335.
